High-voltage dual triode 6FQ7 / 6CG7 are employed in the output stage of the SRM-006tS. The well-sounding rich mid- and low-range tone covers all genres from vocal to orchestra and enables you to enjoy music over a long period of time.
The balanced input via XLR terminal along with the custom-made double axis 4-gang volume controller enabled a full-balanced operation from input to sound element drive.
High-quality relays are placed close to the input terminal to realize the shortest signal path, and the mutual interference between equipments is eliminated by switching the hot / cold side of the signal simultaneously. 3 lines of inputs are equipped including a XLR terminal. One of the RCA input terminals functions as a parallel out directly providing the incoming signal.
We have a comprehensive selection of Stax devices available for demonstration in our Headphone studios in Berlin-Kreuzberg. We look forward to your visit!
|Frequency response||DC-80 kHz / +0, -3 dB (in the case of use of one SR-407 unit)|
|Rated input level||100 mV / 100 V Outputs|
|Maximum input level||30 V r.m.s. / at Minimum volume|
|Amplification||60 dB (x 1000)|
|Total harmonic distortion||distortion: max. 0.02% at 1 kHz 100 V r.m.s. (in the case of use of one SR-404 unit)|
|Input impedance||50 KΩ / XLR balance 50KΩ×2|
|Number of inputs||RCA×2, XLR×1 (balanced)|
|Maximum output voltage||300 V r.m.s. / 1 KHz|
|Standard bias voltage||DC 580 V|
|Power voltage||120-240V ±10%, 50 to 60 Hz (adjusted for your area)|
|Power consumption||49 W|
|Temperature range for use||Between 0º and 35ºC, max. 90% (no condensation)|
|External dimensions||195 (w) x 103 (h) x 375 (d) mm (including VR knob and pin jack (20 + 10)|
|Vacuum tubes||6FQ7/6CG7 type x 2|
|The standards and external appearance of this unit may be changed without prior notice in order to make improvements.|
Write Your Own Review
You are interessted in our products?
Here you can send us an inquiry, without obligation.
We will contact you as soon as possible.